"Where Fillmore County News Comes First"
Online Edition
Wednesday, April 23rd, 2014
Volume ∞ Issue ∞
 

Is it better to maintain my engine's oil level at the full mark or wait until it reaches the "add" mark to add oil?


Fri, Mar 25th, 2011
Posted in Ask the Expert

Malachi Nelson

Most vehicle manufacturers say it's okay to wait until the level reaches the add mark to add oil. But considering that the crankcase capacity on most passenger cars today is only four quarts, running the engine 25% low on oil (one quart) may not be wise. Here's why. Oil not only lubricates the engine's internal parts, but also helps cool the bearings. The toal amount of oil in the engine, therefore, serves as a heat sink to help control heat. Under normal driving conditions, running a quart low probably doesn't make much difference in terms of bearing temperature or overall engine lubrication. But during extremely hot weather, when driving at sustained highway speeds and/or when towing a trailer, running a quart low may increase the risk of accelerated engine wear and/or damage. The best advice, therefore, is to add oil whenever the dipstick reads low. Don't wait until it is down a full quart. If it needs half a quart, add half a quart to bring it back up to the full mark. Follow your vehicle manufacturer's guidelines for the type and viscosity of oil to use in your engine, or take your vehicle to your local mechanic and have him check you oil level and do what is necessary.

Hwy. 16 & 43

RUSHFORD, MN

507-864-2969

No Comments Yet. Be the first to comment!







Your comment submission is also an acknowledgement that this information may be reprinted in other formats such as the newspaper.